热轧钢板Hot Rolled Steel Plate
冷轧卷板Prime Cold Rolled Steel Sheet in Coil
热轧卷板Prime Hot Rolled Steel Coil
板材Plate products
型钢Profile products
特钢Special steel products
钢带Steel strip product
建材Building materials product
主要产品The main products
邮箱：
电话：
一般结构用钢板
Steel Plates for General Structure主要用途
Steel plates for general structure are widely used in engineering structures such as steel structure buildings, construction machinery, heavy duty cars, bridges, wind power， pressure vessels and so on.
牌号和标准
产品规格
锅炉和压力容器用钢板
Steel Plates for Boilers and Pressure Vessels主要用途
They are mainly used to manufacture boilers and pressure vessels. The steel plates for pressure vessels can be fabricated into device that will sustain certain pressure, temperature and medium, so they are required to possess high strength, good toughness, weldability and surface quality. Many kinds and sizes of the products are required to deliver in heat treatment condition and satisfy ultrasonic test requirements. These steels are widely used in various sectors in national economy, such as reactor, heat exchanger, separator, spherical tank, oil tank, LPG tank ,boiler steam drum and pressure pipes in machinery, petroleum and chemicals, electric power and metallurgy industries, etc.
牌号和标准
|
名字 |
钢材型号 Grade |
条件号 |
|
蒸气锅炉和压力值袋子用钢条 |
Q245R、Q 345R、Q370R、Q420R |
GB/T 713 |
|
18MnMoNbR、13MnNiMoR、15CrMoR、12Cr2Mo1R、14Cr1MoR、12Cr1MoVR |
||
|
地温压为烧杯用厚钢板 |
16MnDR、15MnNiDR、15MnNiNbDR、09MnNiDR |
GB/T 3531 |
|
08Ni3DR、06Ni9DR |
||
|
高防度罐体及水电线路气压镀锌管用钢条 |
A537/SA537 CL2/CL3 |
美标 |
|
07MnMoVR、07MnNiVDR、07MnNiMoDR、12MnNiVR |
GB/T 19189 |
|
|
抗HIC/SSCC罐体刚板 |
Q245R(R-HIC)、Q345R(R-HIC)、(S)A516Gr60/65/70(R-HIC) |
顾客的标准 |
|
焦炉炉壳板 |
LK490C |
|
|
的欧洲规范 |
A515/SA515、A516/SA516、A537/SA537各类A517/SA517品类等 |
美标 |
|
P355GH、16Mo3、13CrMo4-5 |
国标 |
|
|
SPV355、SPV490 等 |
日标 |
产品规格
主要产品The main products邮箱：电话：
主要产品The main products邮箱：电话：
高强度结构用钢板
High strength steel plates for structure主要用途
High strength steel plates for structure have high strength, good low temperature toughness in addition to the excellent welding performance. They are mainly used for the fabrication of the high strength welding structure of construction machinery, coal mining equipment（hydraulic support, scraper conveyer）,boom, outrigger, frame , bulldozer, dump truck, drilling platform ,drilling rig and steel structure and so on. According to purpose，there are 60-80kg high strength steel plates，60-90kg low welding crack sensitive steel plates, quench and temper ultra-high strength steel plates etc.
牌号和标准
产品规格
高强度结构用钢板
High strength steel plates for structure主要用途
牌号和标准
60-80kg级高作用度网络架构钢条（60-80kg high strength steel plates ）
Q460C/D/E/F
GB/T16270-2009
GB/T 1591-2008
Q550C/D/E/F GB/T16270-2009
GB/T 1591-2008
Q690C/D/E/F GB/T16270-2009
GB/T 1591-2008
S460Q/QL/QL1
S500 Q/QL/QL1 EN10025-6：2004
S550Q/QL/QL1
S620 Q/QL/QL1 EN10025-6：2004
S690Q/QL/QL1 EN10025-6：2004
A514 Grade S ASTM A 514
60-90kg级低悍接波浪式纹很强性堆物攻度厚角钢（60-90kg low welding crack sensitive steel plates Q460CFC/D/E YB/T4137-2005）
Q500CFC/D/E YB/T4137-2005
Q550CFC/D/E YB/T4137-2005
Q620CFC/D/E YB/T4137-2005
Q690CFC/D/E YB/T4137-2005
Q800CFC/D/E YB/T4137-2005
蘸火回火超低比强度刚板
quench and temper ultra-high strength steel plates Q800C/D/E GB/T16270-2009
Q890C/D/E GB/T16270-2009
Q960C/D/E GB/T16270-2009
S890Q/QL/QL1 EN10025-6：2004
S960Q/QL/QL1 EN10025-6：2004
产品规格
锅炉和压力容器用钢板
Steel Plates for Boilers and Pressure Vessels主要用途
They are mainly used to manufacture boilers and pressure vessels. The steel plates for pressure vessels can be fabricated into device that will sustain certain pressure, temperature and medium, so they are required to possess high strength, good toughness, weldability and surface quality. Many kinds and sizes of the products are required to deliver in heat treatment condition and satisfy ultrasonic test requirements. These steels are widely used in various sectors in national economy, such as reactor, heat exchanger, separator, spherical tank, oil tank, LPG tank ,boiler steam drum and pressure pipes in machinery, petroleum and chemicals, electric power and metallurgy industries, etc.
牌号和标准
|
公司名称 |
钢种 Grade |
标准号 |
|
蒸气锅炉和各种压力收纳空间用板材 |
Q245R、Q 345R、Q370R、Q420R |
GB/T 713 |
|
18MnMoNbR、13MnNiMoR、15CrMoR、12Cr2Mo1R、14Cr1MoR、12Cr1MoVR |
||
|
恒温有压力金属罐用厚钢板 |
16MnDR、15MnNiDR、15MnNiNbDR、09MnNiDR |
GB/T 3531 |
|
08Ni3DR、06Ni9DR |
||
|
高韧性度罐体及电费压螺旋钢管用铝合金板 |
A537/SA537 CL2/CL3 |
美标 |
|
07MnMoVR、07MnNiVDR、07MnNiMoDR、12MnNiVR |
GB/T 19189 |
|
|
抗HIC/SSCC收纳空间角钢 |
Q245R(R-HIC)、Q345R(R-HIC)、(S)A516Gr60/65/70(R-HIC) |
用户的需要 |
|
回转窑炉壳板 |
LK490C |
|
|
任何国内外细则 |
A515/SA515、A516/SA516、A537/SA537甚至A517/SA517全系列等 |
美标 |
|
P355GH、16Mo3、13CrMo4-5 |
德国标准 |
|
|
SPV355、SPV490 等 |
日标 |
产品规格
结构用热轧钢板和钢带
Hot-rolled Steel Sheets and Strips for Structures主要用途
结构用钢一般具有较高的强度与较好的成型性能，通常经过简单的加工后承受外部的载荷。适用于焊接、铆接、铰接等一般结构件用。该系列产品具有性能MRCAT猫先生，成型性能好，焊接性能优的特点，产品能够应用于建筑结构、桥梁、船舶、铁路车辆、管道大型机械及其他结构件等各个行业。主要按照国标进行供货，也可参照日标和欧标进行供货。
The structural steel generally has high strength and good formability, is
used to bear external load after simple fabrication and applicable to ordinary
structural members subject to welding, riveting and hinging.
This series of products are characterized by reliable performance, good
formability and excellent weldability, and can be used in various sectors like
building structures, bridges, ships, railway vehicles,
pipelines, large machineries and other structural members. The supply of those
products are mainly in accordance with Chinese national standards, and the
Japanese and European standards
may be taken as references as well.
牌号和标准
国标与日标牌号对应表
Cross Reference of the Steel Designations as per Chinese and Japanese Standards
|
标准规范 |
GB 912/GB3274/GB710/GB711 |
JIS G3101 |
|
钢号 |
Q195, Q215A |
SS330 |
|
Q235A, Q255A |
SS400 |
|
|
Q275A |
SS490 |
国标与德标、欧标牌号对应表
Cross Reference of Steel Designations as per Chinese, German and European Standards
|
标准单位 Standard |
GB 912/GB 3274 |
EN10025-2 |
DIN 17100 |
|
牌号 Designation |
Q195、Q215B |
S185 |
St33 |
|
Q235B |
S235JR |
St37-2，RSt37-2 |
|
|
Q235C |
S235J0 |
St37-3 |
|
|
Q235D |
S235J2 |
- |
|
|
Q275B |
S275JR |
St44-2 |
|
|
Q275C |
S275J0 |
St44-3 |
|
|
Q275D |
S275J2 |
- |
|
|
Q345A |
E295 |
St50-2 |
|
|
Q345B |
S355JR |
- |
|
|
Q345C |
S355J0 |
St52-3 |
|
|
Q345D |
S355J2 |
- |
|
|
Q345E |
S355K2 |
- |
产品规格
主要产品The main products邮箱：250101电话：0531-67606362
核电用钢板 SA738Gr.B
Steel plate for nuclear power SA738Gr.B主要用途
With high strength, good plasticity, toughness and weldability, suitable for manufacture of the steel containment vessel for the nuclear reactor plant.
牌号和标准
Product grade: SA738GR.B
实施标准化： ASME SA-738/SA-738M-2010
Applicable standard: ASME SA-738/SA-738M-2010
产品规格
核电用钢板 P235/265/295/355GH
Steel plate for nuclear power P235/265/295/355GH主要用途
牌号和标准
Product grade: P235GH, P265GH, P295GH, P355GH
连接标准： EN10028-2Applicable standard: EN10028-2
产品规格
核电用钢板 SA516GR55、 SA516GR60、 SA516GR65、 SA516GR70
Steel plate for nuclear power SA516GR55, SA516GR60主要用途
牌号和标准
Product grade: SA516GR55, SA516GR60, SA516GR65, SA516GR70
下达规格： ASME SA-516/SA-516M-2010
Applicable standard: ASME SA-516/SA-516M-2010
产品规格
核电用钢板 SA517
Steel plate for nuclear power SA517主要用途
牌号和标准
Product grade: SA517GR.B, SA517GR.F
审理标淮： ASME SA-517/SA-517M-2010
Applicable standard: ASME SA-517/SA-517M-2010
产品规格
60-90kg 级低焊接裂纹敏感性高强度钢板
60-90kg grade low welding crack susceptibility hig主要用途
牌号和标准
|
Q460CFC/D/E Q500CFC/D/E Q550CFC/D/E Q620CFC/D/E |
标淮： YB/T4137-2005《 《低电焊裂痕敏感脆弱性程度钢材》 Standard: YB/T4137-2005: Low Welding Crack Susceptibility High Strength Steel Plate |
|
Q690CFC/D/E |
|
|
Q800CFC/D/E |
|
|
JG670CF G785CF |
合同书：
JGX698-2011《 JG670CF、 JG785CF 低补焊纹裂敏感脆弱性标准厚钢板枝术协议模板》
Agreement: JGX698-2011: JG670CF and JG785CF Technical Agreement for
Low Welding Crack Susceptibility High Strength Steel Plate
|
产品规格
90-120kg 级系列淬火回火高强度钢板
90-120kg grade series quenched and tempered high s主要用途
牌号和标准
|
Q800C/D/E |
规范标准：
GB/T16270-2009《高力度度结构类型用调质钢板规格》
Standard: GB/T16270-2009: Quenched and Tempered Steel Plate for High Strength Structure
|
|
Q890C/D/E |
|
|
Q960C/D/E |
|
|
JG1200D |
标准：
Q/3700LYS 299－2010《工程机械用超高强韧结构钢板》
Standard: Q/3700LYS 299－2010: Ultra High Strength and Toughness Structural Steel Plate for Engineering
Machinery
|
产品规格
A、 B、 D、 E 级船体用结构钢板
A, B, D and E grade structural steel plate for shi主要用途
牌号和标准
Grade: A, B, D, E (Z25, Z35);
执行标准：九国船规、渔规、 GB712-2000《船体用结构钢》
Applicable standard: Rules for certification by the world's most famous nine recognized classification societies, regulations for fisheries, and GB712-2000 Structural Steel for Ship Hull
产品规格
主要产品The main products邮箱：3电话：0531-67606362
国标H型钢
Chinese H-steel主要用途
牌号和标准
产品规格
美标H型钢
American standard H-section steel主要用途
牌号和标准
产品规格
欧标H型钢
EN H-section steel主要用途
牌号和标准
产品规格
日标H型钢
Japanese standard H-section steel主要用途
牌号和标准
产品规格
澳标H型钢
Australian Standard H-section steel主要用途
牌号和标准
产品规格
俄标H型钢
Russian Standard H–section steel主要用途
牌号和标准
产品规格
耐低温用H型钢
Low temperature resistant H–section steel主要用途
牌号和标准
产品规格
高强度H型钢桩
High strength H–section steel pile主要用途
牌号和标准
产品规格
耐火耐候H型钢
Fire resistant and weather resistant H-section ste主要用途
牌号和标准
产品规格
抗震性能H型钢
Seismic resistant H-section steel主要用途
牌号和标准
产品规格
核电用H型钢
H-section steel for nuclear power plant主要用途
牌号和标准
产品规格
船体及石油工程用钢
Steel for ship hulls and petroleum projects主要用途
主要应用于船舶内部构造用结构件。石油平台用 H 型钢应用于石油平台整体结构建造领域。 Mainly used for structural parts of internal structures of ships. Petroleum platform H-section steel is used in the construction of integral structure of petroleum platform.
牌号和标准
产品规格
国标、英标、美标和欧标等规格产品。 Chinese Standard, British standard, European Standard, American Standard and other specifications for products.
铁路接触网支柱用H型钢
H-section steel for pillars/supports of railway ca主要用途
主要应用于铁路领域的接触网支柱，是钢筋混凝土接触网支柱的替代产品。 Mainly used in manufacture of the pillars/supports for railway catenary system, as an alternative product of the reinforced concrete pillars/supports for the catenary system.
牌号和标准
产品规格
电网建设用大角钢
Large-sized angle steel for power grid constructio主要用途
牌号和标准
产品规格
∠220、∠250 编 ∠220, ∠250 Series
矿山工程用钢
Steel for mining projects主要用途
主要用于矿山隧道支护，特别是一些围岩变形量较大的巷道，也对矿用支护型钢的性能提出了特殊的要求。 Mainly used in mine tunnel supports, especially for some roadways with relatively large deformation of surrounding rock, and also used in structures with special requirements for the performance of the mine supporting steel.
牌号和标准
产品规格
铁路车辆大梁用钢
Steel used for frame of railway vehicle主要用途
主要用于 70 吨及以上的铁道车辆平车的大梁。 Mainly used in manufacture of the frame for the railway vehicle platform wagon of 70 tons and above.
牌号和标准
产品规格
630×200 系列 630×200 Series
汽车大梁用钢
Steel for automobile frame主要用途
牌号和标准
产品规格
叉车门架用钢
Steel for forklift portal-frame主要用途
该产品主要应用于叉车制造业，主要用于制作 1.5～10t 规格叉车的门架制作。 This product is mainly used in forklift manufacturing industry mainly for manufacture of portal frame for forklift truck of 1.5~10t.
牌号和标准
产品规格
履带板
Track plate主要用途
履带板主要用作链轨式挖掘机、推土机的行走部件。 Track plate is mainly used for manufacture of the travelling parts of track-mounted excavator and bulldozer
牌号和标准
产品规格
中低速磁悬浮列车轨排
Middle and low speed Maglev train track skeleton主要用途
应用于中低速磁悬浮列车轨道。 Used in medium and low speed maglev train track.
牌号和标准
产品规格
海洋工程用钢
Steel for ocean projects主要用途
主要应用于海洋石油平台整体结构建造 、平台配套海上浮式储油船（FPSO ）模块制作、船舱顶梁及框架等结构制造。 Mainly used in construction of offshore oil platform structure, fabrication of platform supported Float Production Storage and Offloading (FPSO ) module, manufacture of roof beam and frame structure of cabin.
牌号和标准
产品规格
H200B～HE1000B， UPN 系列槽钢、UPE 系列、 IPE 系列、角钢系列 H200B~HE1000B and UPN series channel steel, UPE series, IPE series and angle steel series
主要产品The main products邮箱：2电话：0531-67606362
高端齿轮钢
High-end gear steel主要用途
牌号和标准
Product grade: SCM822H, SAE8620H, 18NiCrMo5,
Applicable standards: Q/370000SGT 103-2013, Q/370000SGT 100-2013, EN10084-2008
产品规格
高端轴承钢
High-end bearing steel主要用途
牌号和标准
Product grade: GCr15SiMn
执行标准： GB/T18254-2002
Applicable standard: GB/T18254-2002
产品规格
铁路用钢
Railway Steel主要用途
牌号和标准
Product grade: 25MnCrNiMoA
制定规格：技術协议格式
产品规格
风电用钢
Steel for wind power主要用途
牌号和标准
Product grade: S355NL
执行标准：技术协议
Applicable standard: Technical agreement
产品规格
石油管线用连铸圆坯
Continuous casting round billet for petroleum pipe主要用途
牌号和标准
Product grade: X52NS
连接规范标准：工艺服务协议
Applicable standard: Technical agreement
产品规格
系泊链及船用锚链用钢
Steel for mooring chain and marine anchor chain主要用途
牌号和标准
Product grade: CM490, CM690
履行细则： GB/T 18669
Applicable standard: GB/T 18669
产品规格
模具用钢
Die steel主要用途
淬透性高，热处理变形率较低，其性能及使用寿命高。使用于模锻锤锻模、铝合金压铸模、热挤压模具、高速精锻模具及锻造压 力机模具。 Provided with high hardenability, low deformation rate of heat treatment, high performance and long service life, Suitable for use in manufacture of die forging hammer forging die, aluminum alloy die-casting die, hot extrusion die, high speed precision forging die and forging press die.
牌号和标准
Product grade: H13
履行标准规定:GB/T1299—2000
Applicable standards: GB/T1299-2000
产品规格
高压锅炉用无缝钢管用钢
Steel for seamless steel tubes for high pressure b主要用途
牌号和标准
Product grade: P91
执行标准：GB/T5310-2008 或技术协议
Applicable standard: GB/T5310-2008 or technical agreement
产品规格
主要产品The main products邮箱：4电话：0531-67606362
汽车大梁用热轧钢带
Hot rolled steel strip for automobile frame主要用途
AUTOMOBILE FRAME SERIES STEEL PRODUCTS ARE MAINLY USED IN MANUFACTURE OF THE MAIN BEAM, CROSSBEAM, SIDE-BEAM AND CAR BODY AND OTHER STRUCTURAL PARTS OF THE COMMERCIAL VEHICLE, WHICH ARE REQUIRED TO BE PROVIDED WITH SUFFICIENT TENSILE STRENGTH, YIELD STRENGTH, GOOD FORMABILITY, HIGH ELONGATION AND EXCELLENT COLD BENDING PROPERTIES THAT CAN MEET THE REQUIREMENTS OF SHEARING, BENDING, STAMPING, ROLL PRESSING, PUNCHING, WELDING AND OTHER PROCESSINGS, WITH STABLE PHYSICAL PROPERTIES.
牌号和标准
牌号： 510L、 610L、 700L、 J700、 J800 QStE380TM、 QStE420TM、 QStE460TM、 QStE500TM、 QStE700TMS420MC、 S460MC、S500MC、 S550MC、 S600MC、 S650MC、 S700MC
Grade: 510L, 610L, 700L, J700, J800 QStE380TM, QStE420TM, QStE460TM, QStE500TM, QStE700TMS420MC, S460MC, S500MC, S550MC, S600MC, S650MC, S700MC
实行规则： GB3273-2005《小车主梁用带钢不锈钢板和钢表带》SEW092-1990《冷成形的带钢细晶体钢》DIN EN 10149-2： 1996《冷成 型用的高屈服于点钢表带钢扁钢产品设备》
Applicable standard: GB3273-2005: Hot-Rolled Steel Plate and Steel Strip for Automobile Frame SEW092-1990: Cold Formed Hot-Rolled Fine Grain Steel DIN EN 10149-2: 1996 Hot Rolled Flat Steel Products with High Yield Point for Cold Forming
产品规格
汽车车轮用热轧钢带
HOT ROLLED STEEL STRIP FOR AUTOMOBILE WHEEL主要用途
Automobile wheel series steel products is mainly used for manufacture of spokes and rim for rolling-type wheel of a automobile, which are required to be provided with good flange elongation, cold forming, flash welding, fatigue properties and other mechanical properties, and should also have good surface quality and the dimensional tolerance to ensure the air tightness of the wheel and no large rotating vibration pendulum occurring in its operation.
牌号和标准
牌号： 330CL、 380CL、 420CL、 490CL、 SAPH310SAPH370、 SAPH400、 SAPH440、 SH540FB、 SH580FB、 HR440/580HE Grade: 330CL, 380CL, 420CL, 490CL, SAPH310SAPH370, SAPH400, SAPH440, SH540FB, SH580FB, HR440/580HE
完成标准单位：YB/T4151-2006《小小汽车轮子用带钢钢厚不锈钢钢板和尼龙带》JISG3113《小小汽车空间结构用带钢钢厚不锈钢钢板和尼龙带》及单位内控标准单位 SGYJ-001-2015 《车车轴用高防度热扎高扩孔钢板材规格和皮带》GBT 20887.2-2010 《车用高防度热连轧板材规格及皮带 第 2 的部分： 高扩孔钢》
Applicable standard: YB/T4151-2006: Hot-Rolled Steel Plate and Steel Strip for Automobile Wheel JISG3113: Hot Rolled Steel Plate and Steel Strip for Automotive Structures and SISG’s internal quality standards SGYJ-001-2015: High Strength Hot Rolled High Reaming Steel Plate and Steel Strip for Automobile Wheel GBT 20887.2-2010: High Strength Hot Rolled Steel Plate and Steel Strip for Automobile-Section 2 : High Reaming Steel
产品规格
汽车用高强度热轧双相钢带
High strength hot rolled dual-phase steel strip fo主要用途
The hot rolled dual-phase steel is generally used for automotive parts with high strength, high impact resistance and absorbing energy and should meet a certain forming requirement, such as wheels, bumpers, suspension systems and their reinforcing parts. The hot rolled dual phase steel is provided with high strength, low yield ratio, high initial processing hardening rate, excellent matching between strength and toughness and other advantages, in line with the development theme of lightweight, high performance, safety and environmental protection, energy saving for automotive materials, which has thus been widely used in the automotive industry.
牌号和标准
Grade: DP540, DP600
审理标： JGX677-2010 《高韧度带钢双相厚钢材和带钢供货渠道技术应用条件》GB/T20887.3-2010 汽车行业用高韧度热连轧厚钢材及带钢-3. 组成部分，双相钢
Applicable standard: JGX677-2010: Technical Requirements for Supply of High Strength Hot Rolled Dual-Phase Steel Plate and Strip
GB/T20887.3-2010: High Strength Hot Rolled Steel Plate and Steel Strip for Automobile - Section III-Dual Steel
产品规格
汽车传动轴用热轧钢带
Hot rolled steel strip for automobile transmission主要用途
Automobile transmission shaft tube steel is mainly used to make automobile drive shaft tube. As the main function of the transmission shaft tube is to support revolving body and transmit power, the material should be provided with: sufficient strength, stiffness and a certain degree of toughness as well as higher fatigue strength, that is, the raw materials should be provided with good comprehensive mechanical properties. The longitudinal welding technology is generally used to manufacture the automobile transmission shaft tube, and the dimension control process is based on the method of controlling the inner diameter by controlling the outer diameter; Therefore, the steel for the shaft tube of the transmission shaft should be provided with good welding performance and high dimensional precision.
牌号和标准
Grade: 440QZ, 480QZ, 700QZ
执行力条件： JGX658-2010 《 440QZ、 480QZ 热轧钢带技术应用商议》
Applicable standard: JGX658-2010: 440QZ, 480QZ Technical Agreement for Hot Rolled Steel Strip
产品规格
石油天然气输送管用热连轧钢带
Hot continuous rolling steel strip for petroleum a主要用途
国际原油使用量先天气推送管用热连轧链条含有较高的构造、高的塑弹性，低的韧塑性变形转移水温，稳定的对焊能力指标或是样板工程的抗氢致裂纹和 塑炼物承载力腐化裂纹能力指标，最主要的应用在打造推送国际原油使用量、先天气、水煤浆等物料的热力管道。 The hot continuous rolling steel strip for petroleum and gas transportation pipeline is provided with high strength, high plasticity, low ductile brittle transition temperature,good weldability, good welding performance as well as excellent anti-HIC and sulfide stress corrosion cracking properties, which is mainly used in manufacture of pipelines for transporting petroleum, natural gas, coal-water slurry and other media.
牌号和标准
GB/T14164-2013: Hot Rolled Wide Steel Strip for Transportation Pipeline of Oil and Gas Pipelines;
API Spec 5L: Steel Pipe for Pipeline ; GB/T9711.2-1999: Technical Specification for Delivery of Transportation Steel Pipe for Petroleum and Natural Gas Industry
产品规格
油井套管用热连轧钢带
Hot continuous rolling steel strip for petroleum w主要用途
牌号和标准
产品规格
低铝、低碳、低硅复合材料用热轧钢带
Hot rolled steel strip for low aluminum, low carbo主要用途
注意代替钢铝和好板基料。钢铝和好涂料根据了钢的高防度、易难以清理和铝的质轻、价廉、 达标率的导电、传热性食物等的优势，在国际航空、机械设备制造、纸业、医疗机构、客车、电业等双各方面科技领域实现了很广技术应用。 The hot-rolled steel strip for low aluminum, low carbon and low silicon composite materials is mainly used as base material for steel-aluminum composite plate. Steel aluminum composite has been widely used in many fields, such as aviation, machinery, chemical engineering, medical treatment, automobile, electric power and so on, thanks to its high strength, easy cleaning, light weight, low price, excellent electrical conductivity and thermal conductivity.
牌号和标准
Grade: YBFe, SRG, DK50, DC01-LY Applicable standard: Technical agreement
产品规格
集装箱用热轧钢带
Hot rolled steel strip for containers主要用途
The steel for containers is provided with high atmospheric corrosion resistance, suitable for use in manufacture of container shell plate, structural parts and so on. The container steel developed by SISG is based on the design with reasonable composition of Cu, P, Cr and Ni added in the low carbon steel, with excellent corrosion resistance and precise dimension as well as good plate shape, surface quality and formability index, which can well meet the requirements for the container steel.
牌号和标准
Grade: SPA - H
实施规格： JIS G3125 《高耐下垫面防腐蚀热挤压不锈钢板》
Applicable standard: JIS G3125: High Atmospheric Corrosion Resistant Rolled Steel Plate
产品规格
主要产品The main products邮箱：5电话：0531-67606362
MRCAT猫先生出口的钢筋产品
SISG’s steel products for export主要用途
牌号和标准
|
No. |
Supply grade |
Standard |
Specification mm |
Delivery status |
Application field |
|
1 |
British standard 460 (B) |
BS4449 |
Φ10-Φ50 |
Hot rolled |
Export, Foreign engineering construction |
|
2 |
British standard B500B |
BS4449 |
Φ10-Φ50 |
Hot rolled |
|
|
3 |
Japanese standard SD295A |
JISG3112 |
D10-D51 |
Hot rolled |
|
|
4 |
Australian standard 500N |
AS/NZS4671 |
Φ12-Φ36 |
Hot rolling/Controlled rolling |
|
|
5 |
Korean standard SD400 |
KS D 3504 |
D10-D5 |
Hot rolled |
|
|
6 |
Japanese standard SD390 |
JISG3112 |
D10-D51 |
Hot rolled |
|
|
7 |
Japanese standard SD390 |
ASTM A615-A615M |
3#-18# |
Hot rolled |
|
|
8 |
Malaysia |
MS146 |
According to user's requirement |
According to user's requirement |
产品规格
普通建筑用热轧钢筋
HOT ROLLED REINFORCING BARS FOR ORDINARY BUILDING主要用途
牌号和标准
|
序号顺序 |
名称 |
牌号 |
尺寸 mm |
强制执行标准化 |
作用 |
|
1 |
热扎带肋箍筋盘条 |
HRB400/HRB400E/HRB500/HRB500E |
Φ6-Φ10 |
GB1499.2 |
古建筑用钢 |
|
2 |
热轧钢板光圆钢筋焊接盘条 |
HPB235/HPB300 |
Φ6-Φ22 |
GB1499.1 |
建造用钢 |
|
3 |
钢筋混凝土用热轧带肋钢筋 |
HEB335/HRB400/HRB500/HHB335E/HRB400E/HRB500E/HRB600 |
Φ10-Φ50 |
GB1499.2 |
工程建筑用钢 |
No.
Name
Grade
Specification
mm
Applicable
standard
Purpose
1
Hot rolled ribbed steel bar wire roll
HRB400/HRB400E/HRB500/HRB500E
Φ6-Φ10
GB1499.2
Steel for building
2
Hot rolled plain round steel bar roll
HPB235/HPB300
Φ6-Φ22
GB1499.1
Steel for building
3
Hot rolled ribbed steel bar for
reinforced concrete
HEB335/HRB400/HRB500/ HHB335E/HRB400E/HRB500E/
HRB600
Φ10-Φ50
GB1499.2
Steel for building
产品规格
特殊用途棒材
Bar materials for special purpose主要用途
牌号和标准
|
No. |
Steel grade |
Steel grade |
Specification mm |
Applicable standard |
Purpose |
|
1 |
Anti-seismic Reinforceing steel bar |
HRB335E/HRB400E/HRB500 |
Φ10-Φ50 |
GB1499.2 |
Applied to seismic prone areas and building with high requirements or super high-rise buildings with special use requirements, large-span bridges, airports, nuclear power plants, tunnels, water conservancy projects and other fields. |
|
2 |
Finish rolling thread steel |
PSB785/PSB 830/HRB500JZ |
Φ25, Φ32 |
GB/T20065 |
Used in continuous beam and large frame structure in super large building, large water conservancy project, industrial and civil buildings, and highway and railway large and medium span bridges, nuclear power plant, ground anchors and other projects. |
|
3 |
Hot rolled Round steel |
20MnSi |
Φ14-Φ60 |
Φ14-Φ60 |
Used in manufacture of chains |
|
4 |
Anchor rod Reinforceing steel bar |
MG335 |
Φ18-Φ22 |
LGJX16-2011 |
Mainly used in coal mine roadway support, and also suitable for use in highway tunnel support and side rock protection. |
|
MG400 |
|||||
|
MG500 |
LGJX12-2011 |
||||
|
Full-strength anchor rod |
LGJX14-2011 |
||||
|
Right-screw anchor rod |
Φ16-Φ22 |
LGJX02-2010 |
|||
|
CRM600 |
Φ22 |
||||
|
CRM600 |
Φ220, Φ22 |
LGJX49-2010 |
|||
|
5 |
Resin anchor Rod steel bar |
MG335-MG600 |
Full sizes |
Full series |
产品规格
鲁公网安备 37010102000509号